Installing a water heater in an apartment ensures a consistent supply of hot water, regardless of seasonal outages or the condition of central utility systems. To ensure the equipment operates safely and efficiently, it is essential to plan the installation location in advance with propane furnace service, assess the load-bearing capacity of the walls and the electrical system, and select the appropriate fittings and connection configuration.
The installation boiler contractor process involves preparing the mounting site, connecting the water supply, installing shut-off and safety valves, setting up a drainage system, and ensuring a proper electrical connection. If there is any uncertainty regarding the condition of the wiring or protective electrical components, it is advisable to consult a qualified electrician; errors at this stage can easily lead to overheating, power interruptions, or hazardous emergencies.
Preparation: Choosing a Water Heater and Installation Site
The appropriate capacity and type of unit depend on the number of users and their consumption habits: 30–50 liters is typically sufficient for one person, 50–80 liters for a household of 2–3 people, and 80–100 liters or more for a family of four or larger. Storage-tank water heaters are suitable for most apartments, whereas tankless (instantaneous) models require higher power capacity and more demanding electrical infrastructure.
The installation site is generally limited to a bathroom, washroom, or kitchen. Key considerations include: accessibility for maintenance, the feasibility of routing water pipes, sufficient space for a safety valve and drainage, and keeping pipe runs as short as possible to minimize heat loss.
Assessing Walls and Mounting Hardware
Because a filled storage tank is quite heavy, the mounting method must be appropriate for the specific type of wall. Anchor bolts are used for solid, load-bearing walls, while weaker wall structures may require specialized fasteners or additional reinforcement.
You must not mount a heavy water heater on unreliable partition walls without prior structural calculations and reinforcement.
Assessing the Electrical System and Safety
Most storage-type water heaters require a dedicated electrical services circuit equipped with a circuit breaker and an RCD (residual current device) or an RCBO (combined RCD and circuit breaker), as well as a reliable grounding connection. The use of extension cords or multi-outlet adapters (power strips) is strictly prohibited. The choice of cable, its cross-section, and the ratings of the protective equipment must be determined based on the water heater’s power output and the installation conditions—taking into account the fact that these units are located in damp environments.
Selecting the Capacity and Power of a Storage Water Heater Based on the Number of Occupants
When choosing a storage water heater, the goal is not simply to “get the largest one possible,” but rather to select a capacity that matches your actual usage patterns—such as showering, washing up, doing dishes, or the occasional bath. A tank that is too small will constantly run out of hot water, while one that is too large will take longer to heat up, occupy unnecessary space, and lead to greater heat loss while the water is being stored.
Base your decision on the number of residents, their daily habits, and the desired hot water temperature. The higher the temperature set in the tank (for example, 70–75°C) and the more cold water you mix in at the faucet, the “effectively greater” the volume of hot water you will have available; however, this also makes a properly functioning safety valve and correct system configuration all the more important.
Practical guidelines for capacity and power
Capacity (typical values for an apartment, assuming standard usage such as showering and general household needs):
- 1 person: 30–50 L (showering, washing up, dishes).
- 2 people: 50–80 L (allows for comfortable consecutive showers).
- 3 people: 80–100 L (consistently sufficient for peak evening demand).
- 4 people: 100–120 L (several consecutive showers without needing to rush).
- 5 or more people: 120–150 L or more (alternatively, consider using two tanks, an instantaneous water heater, or a larger-capacity storage tank, provided the electrical supply can handle the load).
The power rating of the heating element (immersion heater) primarily affects the heating speed (rather than the total “amount” of hot water). For most apartments, the following ranges are suitable:
- 1.5 kW: slower heating, puts less strain on the electrical grid; …suitable when there are limitations on the electrical wiring.
- 2.0 kW: a versatile option for 50–100 L, offering a balance between heating speed and electrical load.
- 2.5–3.0 kW: provides faster heating for 80–150 L, but requires robust electrical wiring, an appropriate circuit breaker, and the correct cable gauge.
A quick check to see if a unit will be “sufficient” (assuming hot water is primarily needed for showering):
- Identify the peak usage period—when several people use water in succession.
- If you anticipate 2 consecutive showers during peak hours, a 50–80 L tank is usually sufficient; for 3–4 consecutive showers, 80–120 L is typically required.
- If the speed at which the hot water supply is replenished is important, choose a power rating of 2.0–3.0 kW (provided your electrical system can handle it).
In summary: select the capacity based on the number of residents and peak consumption patterns, and choose the power rating based on your desired heating speed and the capacity of your electrical wiring. A properly selected water heater ensures a reliable supply of hot water without unnecessary costs or overloading the electrical grid—making it a truly practical solution for an apartment.










